Introduction: AirPod is one of Apple’s wireless earphones and if you own one, then it’s very important to know how to perform a factory reset on your AirPods. Sometimes, you may experience network problems or maybe you wish to clear all your preferences or hand them over to the next user. This guide applies to AirPods, AirPods Pro, and AirPods Max and offers proper and detailed instructions on how to reset your device.
Why Factory Reset Your AirPods?
Resetting your AirPods to factory settings is good for solutions to the problems you may encounter on your AirPods, including connection issues, audio hitches, and performance problems. This means that you set your AirPods back to how they were new, solving most of the issues. Besides, it erases all identification data associated with a paired device, thus getting it prepared for the next owner.
Steps to Factory Reset AirPods
“To restore your AirPods to their original settings, follow these simple steps to reset them and troubleshoot common issues.”
Step 1: Open the Lid of the Charging Case and Place the AirPods Inside –
Press and hold the outer button (either one) on the AirPods case, while your AirPods are connected to the device until the ‘Settings’ menu appears on your screen. Make sure that you close the lid to start with. Ensure that the battery in the case is charged adequately to facilitate the reset in case it will be needed.
Step 2: Wait for 30 Seconds
Some cases involve waiting for thirty seconds before moving to the next step to allow the system to complete running or processing a certain task. After your AirPods have been placed in the case, let them charge for at least half a minute. This time is necessary for your AirPods to get ready for the reset process so that you don’t lose any of your saved information.
Step 3: Open the Lid and Find the Setup Button
At the 30-second mark, open the lid of the charging case. You will note a small button on the back of the case, and that is the setup button. The next thing that must be done is to keep the setup button pressed for a while to let the system recognize it. Hold it for approximately fifteen seconds until the status light of the device turns red or green depending on the model. First, it will turn amber then white. The White Flash indicates that your AirPods are ready to be paired with any other device.
Reconnecting Your AirPods
As much as a factory reset will erase all the previously connected devices paired with your AirPods, you have to pair them again. First of all, ensure that Bluetooth is on in the device you want to pair your AirPods with.
- Open the Charging Case: Ensure the AirPods are inserted in your ears, and the charging case should be opened near the device.
- Follow the On-Screen Instructions: You should see a connection prompt on your device. Click the given instructions and follow them to pair successfully.
Troubleshooting Factory Reset Issues
Sometimes, problems may arise when the user wants to reset their AirPods. If the status light doesn’t flash or the reset seems unsuccessful, follow these steps:
- Check Battery Level: Check if your AirPods and the case have enough battery to continue the test.
- Ensure Proper Setup: Make sure you hold the setup button for the right amount of time so that the AirPods can recognize the reset signal.
- Try Again: If the reset does not work the first time, redo the process.
Resetting AirPods Max
If you own AirPods Max, the process of performing a factory reset is somewhat different but equally simple.
Step 1: Charging Your AirPods Max: Ensure your AirPods Max has enough charge to complete the reset process.
Step 2: Locate the Digital Crown and the Noise Control Button: Find the Digital Crown and the Noise Control button of the AirPods Max.
Step 3: Hold Both Buttons: Press and hold both the Digital Crown and the Noise Control button simultaneously until the device enters the boot-mode screen. Wait until an amber LED light comes on, then a white LED light.
Can You Factory Reset AirPods Without an iPhone?
Indeed, it is possible to factory reset your AirPods without the use of an iPhone. You can reset them using the guidelines mentioned above even when using an Apple device to connect via Bluetooth technology or any other device to connect.
How Often Should You Factory Reset AirPods?
There is no specific schedule for when you should reset your AirPods. If you often face issues, such as disconnections or battery problems, it’s advisable to perform a factory reset. Proactive maintenance ensures that your gadgets work as best as they can.
How to Know Your AirPods Are Successfully Reset
Once you are done with the factory reset, you can discover the success of the process via the status light on the case. If it is flashing white, they are reset and ready for pairing; if there is an amber light, further action is required.
Use Cases for Resetting AirPods
Knowing how to factory reset AirPods can help in various situations:
- Troubleshooting Problems: Sometimes your AirPods may start disconnecting, but resetting normally helps solve this problem.
- Selling or Gifting: This means that they should not include any personal settings when given to another person.
- Switching Between Devices: This can be reset if the user frequently switches between devices and experiences connection issues.
Conclusion
Any holder of AirPods needs to know how to factory reset the device in the future. Devices sometimes encounter problems; performing a power reset will effectively solve most of such issues. Therefore, irrespective of whether you own AirPods, AirPods Pro, or AirPods Max, the procedure for resetting the device is almost the same. Regular check-ups and resetting functions are imperative over time so that your AirPods will function as expected.
FAQs About How To Factory Reset Airpods
“Learn the step-by-step process to easily restore your AirPods to their original factory settings, ensuring optimal performance and troubleshooting any persistent issues.”
Q1. How to factory reset AirPods Pro?
If you want to factory reset your AirPods Pro, put your AirPods in the charging case and shut the lid tight. Wait for roughly half a minute. With the lid open, press and hold the setup button on the back of the case for about 5 seconds; the status light will glow from amber to white. Your AirPods Pro will be erased.
Q2. How to reset AirPods 2?
If you wish to reset the AirPods 2, first take them out of the charging case while keeping the lid closed, and wait for 30 seconds. After this time, open the lid and press the setup button on the back for roughly 15 seconds. After the status light shifts from amber to white, your AirPods 2 will be ready for setup.
Q3. How does a factory reset AirPods without an iPhone?
You can easily factory reset AirPods without using an iPhone. Place the AirPods in the charging case, close the lid for 30 seconds, then open the lid and press the setup button on the back until the light turns amber and white. This process does not require any accessory apart from the charging case.
Q4. How to reset AirPods 3?
To reset AirPods 3, put the buds in their charging case and shut the case for half a minute. Next, open the lid and push the setup button located at the rear side of the case while its status light begins to blink amber and then switch to white. This will also restore your AirPods 3.
Q5. How does a factory reset AirPods Pro from the previous owner?
To erase all the settings and data originally set up by the previous owner on AirPods Pro, place them in their charging case and shut the lid for 30 seconds. After that, remove the lid and keep the setup button pressed for 15 seconds until the light turns from amber to white, signaling that the reset is done.
Q6. How to reset AirPods 1?
For AirPods 1, the reset process is simple; place the AirPods in the charging case and close the lid for 30 seconds. Open the lid, and press the setup button on the back until the status light glows amber and then transforms to white. This confirms that the AirPods 1 have been successfully reset.
Q7. How to reset AirPods from the previous owner?
If there is another person’s data on the device, the AirPods can be reset by placing them in the charging case and shutting the lid for half a minute. Lift the lid and press and hold the setup button at the rear of the case until the light switches from amber to white. This helps delete previous connections and enables a new connection.
Q8. How to factory reset AirPods Max?
If you would like to factory reset your AirPods Max, ensure that it is charged. Then place your finger on the Digital Crown and the Noise Control button. Press both buttons for about 15 seconds, and when you see the LED light change to amber and then to white, release the buttons. Your AirPods Max will be reset to factory defaults.
Q9. How do you reset AirPods?
AirPods can be reset by placing them in the charging case and closing the lid for half a minute. After waiting, power it off, and to resume, press the setup button until the status light changes from amber to white. Resetting brings your AirPods back to their factory settings.
Q10. How to restart AirPods?
To reset the AirPods, put them inside the case and cover the case with its lid for fifteen seconds. Just open the lid one more time and your AirPods will power on and connect to the devices that you used before.
Be First to Comment